Practical guide

PetSafe 5 Meal Schedule: Five Compartments and Nine Time Slots

Set the clock, save only the daily times you need and map each rotation to a real food compartment. Nine programmable slots do not create nine stored portions.

Pet owners checking the instructions and actual behavior of a named automatic feeder · 7 minute read · Published

Five compartments are different from nine daily time slots

The PetSafe 5 Meal feeder has five physical food compartments. One is at the opening and accessible immediately; the other four are initially covered. PetSafe’s current support pages also describe nine programmable feeding-time slots. These numbers describe different things: five places to put food and nine daily clock entries that can cause rotation.

A saved time does not create another filled compartment. Once the tray moves, a different physical portion appears at the opening. A repeatedly scheduled time can eventually expose a compartment that has already been used. Plan the tray position and refill alongside the clock settings, rather than treating nine programmable times as nine meals waiting inside.

This guide concerns the 5 Meal family identified on the current product page, including PFD11-13707. Use the current instructions for the actual model. It is not the Digital Two Meal’s independent lid countdown, and it does not use a Simply Feed hopper to measure a new portion at each scheduled time.

Five physical portions
Original sequence diagram for a freshly filled Five Meal tray. It separates physical compartments from programmable clock slots; no feeder was tested.

Capacity, schedule and controls

Capacity, schedule and controls
ItemWhat it meansWhat it does not mean
Five physical compartmentsOne open now; four initially coveredNot nine physically stored portions.
Nine programmable time slotsSaved daily times for tray rotationNot a fresh supply of food for every entry.
FeedNowMove the tray to expose another compartmentNot a refill and not proof of intake.
Suspend feedingPause all scheduled meals until resumedNot just skipping one meal or automatically resuming tomorrow.

Set the actual clock before meal times

Install four appropriate D-cell batteries following the battery-compartment diagram and the maker’s instructions. A blank screen needs the power/battery check; a display showing no set time needs clock setup. After battery replacement, current support says the flashing display requires time and meals to be programmed again.

Use the clock button to return to the current-time view. If you want to change 12- versus 24-hour format, the current support page says to hold the clock button for 15 seconds, then release. The AM/PM marker disappears for 24-hour format and appears for 12-hour format. Do this before setting the time.

  1. Press the clock button, then Select, so the hour flashes.
  2. Use Increase or Decrease to set the current hour. In 12-hour format, explicitly check AM or PM; do not stop when only the number looks right.
  3. Press Select again so minutes flash. Use Increase or Decrease to set the minutes.
  4. Press the clock button to finish. Compare the displayed time with your reference before programming meals.

The 2022 operating guide uses icons: the clock, a checkmark for Select, triangular Increase/Decrease controls and separate Suspend and FeedNow symbols. Check those controls against the actual panel illustration. An icon you have not identified is not a reason to press buttons until a tray moves.

Programme only the daily times you need

PetSafe says feeding times repeat daily. If you want two daily scheduled rotations, set time slots 1 and 2 and leave the other seven unused slots blank. Do not copy the same two times into all nine slots. Duplicate entries or the wrong AM/PM can produce a very different rotation pattern from the one you intended.

  1. Press the clock button. Use Increase to select feeding-time slot 1 at the lower left of the display.
  2. Press Select so the meal hour flashes; use Increase/Decrease to choose the intended hour and AM/PM.
  3. Press Select for minutes, adjust them, then press the clock button to save the feeding time.
  4. For another intended daily meal, select slot 2, 3 or the next required slot and repeat. Review every saved time in order.
  5. Inspect unused slots and clear unintended times. Record the final daily list before loading the tray.

To remove a particular saved time, the current support page says: press Clock, use Increase to show the relevant slot, press Suspend Feeding to reset that time, then press Clock to finish. In this meal-editing context, that control removes the selected time; holding it in normal operation is the separate all-meals Suspend action.

Keep the intended times in chronological order, with no duplicates, as directed by the current skipping/spinning support page. The schedule is a household plan you supply; this page does not decide the correct meal frequency or food amount for your pet.

Load and orient the tray for the next actual rotations

The operating guide shows clockwise tray rotation. Compartment 1 at the opening is immediately accessible, compartment 2 appears at the first scheduled rotation and compartment 3 at the next. This relationship is useful for planning the next four initially covered portions, not for claiming an unlimited repeating food supply.

The product page and operating guide describe up to 1 cup in each compartment and suitable dry or semi-moist food/treats for this model. Keep portions level and do not overfill. Capacity is a container limit, not an individual feeding recommendation. Follow the food maker’s storage and serving guidance and your existing pet-feeding plan.

Place the desired compartment at the front using the maker’s FeedNow control if needed, while keeping clear of moving parts. Each rotation changes which physical portion is exposed. If food is present, account for a manual rotation in the meal/refill record; do not repeatedly expose additional portions merely to check a clock setting.

After filling, confirm the tray is seated correctly and the lid is closed as instructed. Record the current opening compartment and the expected next compartments. Supervise operation before relying on the plan; an intended daily time is not evidence that the tray actually moved.

Suspend, resume and refill are separate jobs

Holding Suspend Feeding for seven seconds, then releasing, pauses all scheduled meals without losing their settings according to the operating guide. The suspend icon appears at the upper right. Current support emphasizes that this persists into the next day. Press and release Clock to resume; confirm the icon disappears.

Removing one feeding-time slot, pausing all scheduled rotations and using FeedNow are different operations. Read the display and record which action you actually took. A displayed mute icon after holding a control for longer is not proof that this feeder has an audible feature or that feeding has resumed.

The timer can continue its daily schedule after the finite food supply is used. Refill based on the actual compartments and your food-storage guidance. Do not infer that the full nine-slot menu makes the device suitable for an unattended multi-day arrangement. Frequent checks of actual dispensing and appropriate pet care remain necessary.

Two complete schedule and refill examples

Two saved times, five physical portions

Hypothetical record: A hypothetical tray has one portion available at setup. Four covered compartments are filled. The daily rotations are 08:00 and 20:00, and no manual FeedNow is used.

Decision: Keep just the two daily times and plan the next four rotations with a refill before another used compartment is exposed.

The four covered portions correspond to four rotations: 08:00 and 20:00 on one day, then 08:00 and 20:00 on the next. That is two days of these scheduled rotations plus the initially accessible portion. It is a capacity calculation only; it does not certify food safety, the appropriate pet schedule or unattended care.

Duplicate entries create more rotations

Hypothetical record: A hypothetical user wants two daily meals but has entered 08:00 and 20:00 repeatedly across several of the nine slots. The tray then exposes a different compartment than the user expected.

Decision: Review all nine entries; keep only the intended two, clear the duplicates and verify the current tray position.

Two desired times do not become more useful by appearing in several slots. The setting review addresses one documented cause of skipping or repeated movement. If the movement remains wrong after the schedule is corrected, use the separate tray-fault guide rather than diagnosing the motor from this fictional example.

Download the editable record (TXT). Save your observations in your own copy; this page does not collect pet or household details.

Model and manual revision:
Actual current clock, format and AM/PM:
Daily time 1:
Daily time 2, if needed:
Other intended daily times:
Unused slots checked blank:
Compartment currently at opening:
Each filled compartment and food amount:
Next four planned rotations and expected compartments:
FeedNow used? which portion moved?
Suspend icon present? resumed?
Next refill and supervised operation check:

A useful finished setup has three matching records: the current clock, the intended daily time list and the actual tray/refill sequence. If those agree but the tray does not behave as expected, investigate the specific symptom using the fault guide.

Sources and further reading

  1. PetSafe: 5 Meal Pet FeederFive physical compartments, the immediately accessible first portion and the model’s capacity/control scope.
  2. PetSafe: How to Schedule a Meal on My PetSafe® 5 Meal Pet FeederDaily meal programming, intended slots and blank unused entries.
  3. PetSafe: My PetSafe® 5 Meal Pet Feeder Won’t Stop Spinning or is Skipping MealsNine daily time slots, duplicates, ordering and possible skipping/repeated-rotation causes.
  4. PetSafe: How to Suspend or Resume Feeding on My PetSafe® 5 Meal Pet FeederAll-meals Suspend persists until resumed; seven-second hold and Clock resume.
  5. PetSafe: How to Set or Change the Time on My PetSafe® 5 Meal Pet FeederClock setup, 15-second format change and AM/PM verification.
  6. PetSafe: How to Remove a Scheduled Meal on My PetSafe® 5 Meal Pet FeederRemoving one selected feeding-time slot, distinct from pausing all meals.
  7. PetSafe: 5 Meal operating guide L400-2562-11, ©20222022 guide: physical tray sequence, controls, clock/daily setup, removal and all-meals Suspend, pages 2–6. Current web support separately states the nine-slot count.