Practical guide
PetSafe FlexFeed Clock and Schedule: Set, Change and Remove Meals
Use a SET hold for the clock and a SET press for daily meals. Confirm M:, AM/PM, minutes and each P:, then review remaining entries after deleting a meal.
Separate the clock from the meal-count screen
On FlexFeed PFD00-18090, holding SET edits the current clock; pressing and releasing SET edits daily meals. The M: field identifies meal programming and the P: field is the approximate portion setting. Knowing which field is flashing prevents changing a meal count when you meant to correct the time.
The 2025 quick-start guide 400-2652/1 illustrates six local buttons: microphone Record, Lock, Up, Down, SET and FEED. This model does not need an app for the reviewed clock/schedule procedure. Do not copy a MyPetSafe app menu or another feeder’s Pause combination.
The control panel is locked by default to prevent button-driven extra food. Hold Lock for 3 seconds to unlock; the feeder beeps and shows the unlock icon. Identify that actual icon before editing. The FEED button is a food request, not a clock-confirm button.
Set the actual 12-hour clock first
- Unlock with the 3-second Lock hold if necessary.
- Hold SET for 3 seconds, until the hour field flashes.
- Use Up/Down to choose the actual hour and check AM/PM. The guide describes a 12-hour display.
- Press SET to confirm the hour; use Up/Down for minutes, then SET to confirm them.
- Compare the finished time with your real reference before saving feeding times.
Press and field check
On a narrow screen, scroll the table sideways to read every column.
| Action | Field/job | Avoid this confusion |
|---|---|---|
| Hold SET 3 seconds | Current clock hour | Do not edit M: to fix the clock. |
| Press/release SET | Meals-per-day programming | Do not mistake a saved meal time for the current clock. |
| Up/Down then SET | Select then confirm each field | Check hour AM/PM, minutes and P separately. |
| FEED after unlock | One manual portion request | Not a save button or a substitute for schedule verification. |
Programme M:, each time and each P: in order
- Press/release SET after unlocking. When M: flashes, use Up/Down to choose 1–8 daily meals and SET to confirm.
- For meal 1, choose the hour including AM/PM; press SET. Choose minutes; press SET.
- When P: flashes, select the desired setting 1–15 and press SET. These are approximate feeder units, not grams.
- Repeat hour, minutes and P for every subsequent intended meal until programming returns to the main display.
- Review the complete list and prime the feeder before the first programmed event, using the linked model-specific method.
PetSafe’s current support says the schedule repeats daily. A desired 08:00 event is entered once as a daily entry, not separately for every day of the week. This page does not choose an appropriate meal frequency or individual food allowance.
Use different times for intended separate feedings. The current “not dispensing enough” article says when FlexFeed feedings share the same time, only one meal dispenses. Do not assume P4 and P8 at the same time create a reliable P12 delivery. The source does not establish which amount wins in every conflicting setup.
Remove a meal by reviewing the resulting daily list
The documented remove-feeding route lowers the number of daily meals: unlock, press SET, reduce M: with Up/Down and confirm. Programming then returns to meal 1’s hour. Check and, where needed, re-enter every remaining meal’s hour, AM/PM, minutes and P.
For example, if a three-entry plan becomes two entries, do not assume that reducing M automatically chooses the middle meal you meant to remove while preserving the last. Confirm the two intended times and their portions in the resulting list. Source support explicitly requires that review, then points to priming.
Changing one schedule entry is not a factory reset. Resetting to remove a voice call deletes the clock and all feeding settings; use the meal-call/reset consequence guide for that separate decision.
One verified daily list
- Clock firstActual time and correct AM/PM.
- M countOnly the required number of daily meals.
- Each time + PConfirm every entry, with distinct intended times.
- Prime and observeRecord manual output and the complete next applicable event.
Two full programming decisions
These are original hypothetical examples. No feeder, pet, repair, electrical supply or food-output trial was performed.
Remove lunch while preserving dinner
Situation: A hypothetical existing plan has 08:00 AM P4, 01:00 PM P4 and 08:00 PM P8. The intended revised plan removes the 01:00 PM event.
Next action: Set M to 2, then explicitly confirm/reprogramme meal 1 as 08:00 AM P4 and meal 2 as 08:00 PM P8. Prime as directed and review actual operation.
Why: The meal-count change alone does not prove the desired pair remains. P4+P8=12 is a sum of fictional settings only, not measured grams or a prescribed daily amount.
Two entries accidentally share 08:00 AM
Situation: A hypothetical list contains 08:00 AM P4 and 08:00 AM P8, but the caregiver expected two separate releases.
Next action: Correct the times according to the actual existing plan and review both amounts; do not label the combined settings as observed food.
Why: Current support says same-time entries dispense one meal. This is a schedule problem to check, not proof that a motor has failed or that 12 units were delivered.
Prime, account for manual food and check the next event
Use the FlexFeed portions/priming guide after setup and every refill. Priming uses repeated FEED requests until equal portions emerge; account for that food separately from scheduled meals and individual intake. A full hopper is not evidence priming occurred.
If an expected meal is absent, cover pet care separately and use the no-food/E004 branch for the actual symptom. A saved list, a request and food physically delivered are different facts. Observe a complete applicable event before drawing an output conclusion.
Download the short record (TXT). Keep observations in your own copy; this page does not collect them.
Actual PFD00-18090 / guide: Current clock / AM-PM checked: Meals per day M: Each meal number | hour-AM-PM | minute | P setting: Deleted meal / all remaining entries reviewed: Prime/refill and manual FEED food accounted for: Next complete supervised event / caregiver handover:
Sources and further reading
- PetSafe: How To Set the Clock on My PetSafe® FlexFeed Automatic Pet FeederLocal Lock/SET clock editing and 12-hour AM/PM confirmation.
- PetSafe: How To Program and Choose Food Portions on My PetSafe® FlexFeed Automatic Pet FeederM: meal count, time fields, P: portion settings and daily schedule programming.
- PetSafe: How To Remove a Scheduled Feeding From My PetSafe® FlexFeed Automatic Pet FeederReduce the daily meal count and verify every remaining time and portion.
- PetSafe: My PetSafe® FlexFeed Automatic Pet Feeder Is Not Dispensing Enough FoodFresh batteries, refill priming, same-time single-meal behavior and approximate output.
- PetSafe: FlexFeed quick-start guide 400-2652/1, ©2025Guide 400-2652/1, ©2025: pages 2–8 cover supplied parts, USB/backup power, actual buttons, approximate portion table, priming, recording and cleaning. Separate customer-care safety instructions are referenced by the guide.