Practical guide
How to Clean PetSafe Six Meal and Resume the Saved Schedule
Hand-wash the lid, keep the base dry, wash only the eligible bowl and carousel, then reassemble fully dry and resume Six Meal’s saved schedule.
Pause the saved schedule before taking out food
Six Meal PFD00-15956 has a washable lid, removable bowl and removable six-slot carousel, plus an electronic base that must stay out of the wash water. Cleaning those parts and restoring an active schedule are separate jobs. A neatly assembled feeder can still be asleep.
The current cleaning page begins by pressing the rear Sleep button to suspend scheduled feedings. Record the next meal and any food already supplied. Twist the lid counterclockwise, lift it off, empty remaining food and remove the bowl/carousel as directed. Keep clear of automatic movement and limit disassembly to these user parts.
Keep the actual food and its handling instructions together during cleaning. Do not mix bowl leftovers with clean stored food or invent a safe countertop holding time. The feeder’s timer and lid do not establish food-storage safety.
Wash according to the part, not the product name
Six Meal part-care matrix
On a narrow screen, scroll the table sideways to read every column.
| Part | Documented care | Limit before reuse |
|---|---|---|
| Lid | Hand-wash with warm soapy water | Current support explicitly says not dishwasher safe. |
| Tray carousel | Warm soapy water or top rack of dishwasher | Rinse and dry completely; do not confuse it with the electronic base. |
| Removable bowl | Warm soapy water or top rack of dishwasher | Dry fully and refit its side tabs. |
| Feeder base/electronics | Wipe with a non-abrasive cloth; current support says damp cloth | Never submerge; do not let electronics contact liquids. |
The 2017 quick-start guide says only the bowl and carousel are dishwasher safe, and current cleaning support adds the top-rack placement. “All the feeder parts” is too broad. A generic recommendation to wash a pet bowl does not authorize putting a powered appliance or its lid in a dishwasher.
Wash/rinse the permitted parts, then wait until every cleaned part is completely dry. The quick-start guide expressly requires that drying before reassembly. Do not close damp parts around the electronics or hurry the next scheduled meal by skipping drying. Cover care separately if cleaning cannot finish in time.
Seat the carousel, attach the bowl and lock the lid
- After full drying, insert the carousel completely against the inside bottom of the feeder, as the quick-start assembly instructions show.
- Align the bowl’s side tabs with the slots on the bottom front of the feeder and press it into the described secured position.
- Refill the appropriate tray slots with the existing planned portions of supported dry or semi-moist food. Each slot has a one-cup maximum; level food without mounding.
- Place the lid on the feeder and turn it clockwise to lock. Verify the physical next slot rather than assuming washing preserved the previous food sequence.
The carousel rotates clockwise; the slot to the right of the dispenser supplies the first scheduled meal after a fresh load. Use the schedule/refill map to connect actual tray portions to repeating times. Washing does not add capacity or prove a pet can access the bowl appropriately.
Resolve the final Sleep wording before walking away
There is a wording problem in the current cleaning page: after starting with “suspend” for disassembly, its final assembly step again says to press Sleep to “suspend.” Read that alongside the model’s documented toggle, rather than treating the last word as a reason to leave the next meal disabled.
The programming page and page 6 of quick-start J400-2059 explain that one normal Sleep press pauses the saved schedule and the next wakes it. After the parts are fully dry, assembled and filled, resume with the rear Sleep button and confirm the intended schedule/next meal. If the actual state is unclear, use manufacturer help instead of repeated guessing.
The guide says resumption feeds at the next scheduled meal time. It does not promise to dispense all meals that passed during cleaning. Record any food actually served while paused so another caregiver does not infer a missing amount or request an extra advance.
Cleaning is complete only after the handover
- PauseSave the intended schedule and cover care.
- Wash correctlyLid by hand; bowl/carousel top rack or hand wash; base wipe-only.
- Dry and fitFully dry parts, correctly seated carousel and bowl, locked lid.
- Resume and checkVerify the next actual meal rather than backfilling missed events.
Two cleaning decisions that avoid a new problem
These are original hypothetical examples. No feeder, pet, repair, electrical supply or food-output trial was performed.
The lid was put beside dishwasher-safe parts
Situation: A hypothetical owner removes the lid, carousel and bowl and plans to put all three in the dishwasher.
Next action: Separate the lid for hand washing; only the bowl and carousel use the documented top-rack route. Keep the base out of water.
Why: Dishwasher eligibility belongs to particular components. Similar appearance or the feeder’s name cannot extend that permission to the lid.
Clean parts but an unfinished resume record
Situation: In a hypothetical handover, all parts are dry and assembled at 11:40. A 12:00 meal is intended, but nobody recorded a resume press.
Next action: Confirm the actual Sleep state, resume using the documented toggle if paused, and observe the next applicable event. Keep any meal already served separately.
Why: Dry assembly and an active schedule are different facts. 11:40 being before 12:00 does not prove the feeder is awake or that food will appear; the next observation answers that.
Keep damage and recurring failures with the maker
Do not repair a damaged lid, drive, base or electronic connection with an improvised part. If normal seating cannot be established or meals remain unreliable after correct care and settings, use the bounded Six Meal troubleshooting route and Customer Care.
A finished care record names what was washed, what stayed dry, how parts were fitted and whether dispensing was resumed. It records observed food separately from the pet’s intake. No cleaning outcome or unattended reliability was tested for this article.
Download the short record (TXT). Keep observations in your own copy; this page does not collect them.
Actual model / guide: Saved times / next meal before cleaning: Sleep paused / parts removed: Lid hand-washed / bowl-carousel top-rack or hand-washed: Base wipe-only / all parts fully dry: Bowl tabs / carousel seating / lid locked: Sleep resumed / next event observed / care provided meanwhile:
Sources and further reading
- PetSafe: How to Clean Your Six Meal FeederHand-washed lid, top-rack bowl/carousel, wipe-only base and assembly; its final suspend wording is qualified in the article.
- PetSafe: Understanding Your Six Meal FeederNamed controls, six-slot carousel, separate bowl and four-D alkaline power arrangement.
- PetSafe: How to Program Your Six Meal FeederClock, daily meal editing/removal and the rear Sleep pause/resume toggle.
- PetSafe: Six Meal quick-start guide J400-2059, ©2017Guide J400-2059, ©2017: pages 2–7 cover safety, clockwise tray sequence, exact controls, Sleep and part care. It is the linked quick-start guide; no physical test is reported.