Practical guide
PetSafe Six Meal Schedule: Clock, Six Slots and Refill Planning
Set only the daily times you need, then connect each release to a real filled tray slot. Six stored portions, the separate bowl and repeating times are different facts.
Six tray slots and six daily times are different things
PetSafe Six Meal PFD00-15956 stores six pre-portioned servings in its carousel. The separate bowl can also contain food ready to eat. That bowl does not create a seventh programmable meal. The control allows one to six daily scheduled dispensing times, and the saved times repeat each day.
The carousel releases a prepared tray portion into the bowl; it does not measure a new scoop out of a large hopper. Decide both when food should appear and which real filled slot will supply it. A repeating clock can outlast a finite supply of food.
The reviewed instructions allow dry or semi-moist pet food for this model and exclude wet, canned or moist food. Do not turn that semi-moist allowance into permission to add water or gravy. Each tray slot holds up to one cup; level the food and do not mound or overfill. Capacity is not a recommended serving for a pet.
Identify the controls and set the actual clock
Controls that affect different jobs
On a narrow screen, scroll the table sideways to read every column.
| Control | Documented job | Check before relying on it |
|---|---|---|
| Clock, marked 12:00 | Open current-clock setting | Current time and AM/PM match your reference. |
| Meal Schedule, calendar/clock icon | Hold 2 seconds to programme meals | Meal number and its time are the fields you intend to edit. |
| Up / Down / Enter checkmark | Change and confirm a selection | Confirm each actual time, not just the final screen. |
| Rear Sleep | Pause or resume in normal operation | Paused meals do not resume tomorrow merely because times are saved. |
| FeedNow, food/bowl icon | Dispense the next scheduled meal early | Record the physical portion advanced. |
Use the panel illustrated on page 6 of quick-start guide J400-2059, ©2017. Press Clock, use Up/Down to select the current time, and press Enter to confirm. Check AM or PM as well as the hour. A correct-looking “8:00” can still represent the wrong half of the day.
The guide also uses the rear Sleep button to select 24-hour format while setting the clock. That context differs from its normal pause/resume action. If changing format, follow the guide’s clock sequence and verify the finished time and feeding state; do not press Sleep repeatedly in ordinary operation just to make an AM/PM marker disappear.
Save only the daily meals you need
- Hold Meal Schedule for 2 seconds. Meal 1 and its time field are shown for programming.
- Use Up/Down for the intended time, then Enter to confirm and move to the next meal. This model programmes meals in 15-minute increments.
- Programme each intended daily time. Leave unneeded times at --:-- rather than entering extra copies of breakfast and dinner.
- Current web support finishes editing with Meal Schedule; the 2017 guide also describes confirming through the schedule with Enter. Use the matching instructions and check the completed list.
For an unwanted meal, open the schedule, use Enter to select that meal and follow the support page’s Up/Down removal route to clear its time. Verify --:--, then exit. Changing a time is not the same as removing a meal.
Sleep pauses the saved schedule without deleting it. Press the rear Sleep button again to resume; the guide says feeding continues at the next scheduled meal time. It does not promise to replay missed meals. Keep any food supplied by another caregiver in the record.
Map the next slot before the timer repeats
From a saved time to a real portion
- ClockCheck the real time and format.
- Daily listSave only the intended repeating times.
- Six filled slotsThe slot to the dispenser’s right supplies the first scheduled meal; rotation is clockwise.
- Refill and observationTrack consumed slots, manual advances and the next actual event.
Page 5 shows the tray slot to the right of the dispenser feeding meal time 1, the next slot feeding meal time 2, and so on. Seat the carousel fully against the inside bottom as instructed. Attach the bowl’s side tabs to the front slots, then replace the lid and turn it clockwise to lock.
FeedNow releases the next scheduled meal immediately, then the feeder returns to the remaining programmed schedule. It changes the available portion sequence. Record which food appeared and the next expected meal; do not treat repeated manual advances as harmless clock checks or assume the bowl contents were all eaten.
Two complete schedule and refill decisions
These are original hypothetical examples. No feeder, pet, repair, electrical supply or food-output trial was performed.
Two times, six stored tray portions
Situation: A hypothetical freshly filled tray has six portions. The intended daily times are 08:00 and 20:00; no FeedNow is used. There may also be food already in the external bowl.
Next action: Programme only those two times and map six scheduled releases before refilling. Record the separate bowl food independently.
Why: Six tray portions ÷ two scheduled releases per day gives three days of scheduled releases in this simplified inventory example. It is not proof of safe storage duration, reliable unattended care or a suitable meal plan.
A desired time the grid cannot represent
Situation: A hypothetical existing plan asks for 08:10, but the reviewed Six Meal instructions allow 15-minute increments.
Next action: Record that exact-time mismatch and reassess the device or the existing plan with the appropriate adviser. Do not silently label 08:00 or 08:15 as 08:10.
Why: An available timer setting is not authority to change a pet’s required care. Clock arithmetic and the decision about feeding time are separate.
Finish with an actual next-event check
Read the displayed next meal, confirm Sleep is not still active, and check that the next tray slot really contains the intended food. Supervise operation before relying on it, keeping clear of automatic movement. The guide requires frequent operating checks and excludes dogs/cats under 6 months, animals unable to reach the food tray and animals with a physical disability. Read the matching guide’s full safety instructions for the actual animal.
If a due meal is not delivered, arrange care under the existing feeding instructions while investigating. Use the Six Meal fault guide for the symptom and the correct part-care guide after cleaning. No capacity example certifies a multi-day absence.
Download the short record (TXT). Keep observations in your own copy; this page does not collect them.
Actual model / guide: Current clock / format / AM-PM: Intended daily times / unused --:-- checked: Tray slots filled / amounts / next slot: Food already in the external bowl: Sleep state / FeedNow advancement: Next refill / supervised next event:
Sources and further reading
- PetSafe: Six Meal FeederActual model, physical capacity, food format and supported controls. Manufacturer features do not establish tested output or unattended care.
- PetSafe: How to Program Your Six Meal FeederClock, daily meal editing/removal and the rear Sleep pause/resume toggle.
- PetSafe: Understanding Your Six Meal FeederNamed controls, six-slot carousel, separate bowl and four-D alkaline power arrangement.
- PetSafe: Six Meal quick-start guide J400-2059, ©2017Guide J400-2059, ©2017: pages 2–7 cover safety, clockwise tray sequence, exact controls, Sleep and part care. It is the linked quick-start guide; no physical test is reported.