Practical guide
PetSafe Smart Feed Offline: Power, Wi-Fi, Reboot and Factory Reset
Saved meals can continue without internet only while the feeder remains powered. Check the supported connection and distinguish a settings-preserving reboot from a factory reset.
Separate lost internet from lost feeder power
PetSafe says Smart Feed continues its previously saved schedule during an internet outage as long as it has power. That condition matters. An offline message describes a connection problem; it does not by itself tell you whether the feeder is powered, whether food was delivered or whether a pet ate it.
First confirm the exact model and actual power arrangement, then check the feeder display/status and the household’s internet separately. For a due meal, provide the appropriate feeding care while investigating rather than assuming a remote status message proves delivery.
The current second-generation product page lists models PFD00-15788/PFD00-16828, AC power and four D-cell backup batteries. The older quick-start guide says the batteries are optional backup, not the main power source. This page has not tested backup runtime, power transfer or offline feeding on a device. Read your actual model’s instructions; a product feature does not certify your battery condition.
Power and connection are separate observations
| Observation | What the source supports | What you still need to verify |
|---|---|---|
| Internet lost; feeder remains powered | Previously saved schedule can continue according to support | Actual clock, food supply, delivery and pet care. |
| Feeder power is absent or unresolved | The offline-feeding condition has not been met | Appropriate power/battery route and the due meal. |
| Internet works elsewhere; feeder offline | Investigate the feeder’s own connection | Supported band, status pattern and reconnect result. |
| Connection restored | App communication can resume | Saved settings and actual next-meal operation. |
Record the meals and the actual status pattern
Before reconnecting or resetting, keep a private copy of intended meal times and amounts, the current feeder date/time/time zone and any manual feeds. A factory reset deletes settings; a memory-based reconstruction can put the wrong meal back into an otherwise working feeder.
Record color and pattern together. The 2019 Smart Feed guide 400-2362 distinguishes slow blinking blue as connected to Wi-Fi without internet, fast blinking blue as trying to connect or offline, and solid blue as connected to Wi-Fi with internet. It describes blinking white for reboot, solid white for factory reset and blinking yellow for setup. An unexplained red/mechanical indication belongs with the maker’s separate fault route, not an assumption that every problem is Wi-Fi.
Those are version-specific guide descriptions, not a live device reading here. The older guide uses the app name Smart Feed; the current support pages use MyPetSafe. Use the current support route for your actual unit and do not infer current mobile compatibility from an older printed minimum operating-system version.
Check the supported Wi-Fi route and time zone
The current second-generation specification says 2.4 GHz 802.11b/g/n Wi-Fi and does not support 5 GHz-only connectivity. Use the supported band when checking setup. One offline-support sentence contains “2.4 MHz”; the product specification and the same support context identify 2.4 GHz. This guide follows that specification rather than repeating the apparent unit typo.
Check whether the home internet works and whether the phone/router connection is appropriate. PetSafe’s support route suggests rebooting the router, checking connection near the router and using its quick feeder reboot. Extenders or mesh arrangements can complicate setup; use the actual router and maker guidance rather than treating one generic instruction as compatible with every network.
Do not post Wi-Fi credentials, account details or the private settings record publicly. This page does not log into your app or change your router. If the network is managed by someone else, coordinate the actual network change with them.
For meals at the wrong time, current timing support says the feeder uses a time zone set during setup and regular Wi-Fi updates. Check Date & Time in MyPetSafe and use the documented connection/reboot route as appropriate. A wrong time zone, missing connection and absent power are different issues. The clock still needs checking after reconnecting.
Choose a reboot with its distinct stop point
The maker’s two button actions
| Action | Documented duration and signal | Effect on settings |
|---|---|---|
| Reboot | Hold the recessed reboot/reset control 3–5 seconds until blinking white, then release | Attempts reconnection while preserving programmed settings. |
| Factory reset | Hold 8 seconds or more until solid white; then blinking yellow setup follows | Deletes all programmed meals/settings and returns to setup. |
Read PetSafe’s current reboot/reset support page before using the control. The documented route uses the end of a paper clip to press the recessed button. Keep clear of automatic movement and do not mistake this accessible control for permission to open electronics.
For a reboot, release at the documented blinking-white stage instead of continuing to hold. The source says successful reconnection leads to blinking blue and then solid blue. Record what your actual device does; do not label a different signal successful simply because enough time has passed.
Factory reset is a separate action with a different consequence. Preserve the meal record first and use it only when the actual troubleshooting route warrants returning to setup. After reset, complete the appropriate current setup and restore/verify the intended meals. A factory-reset instruction in an article is not a reset performed here.
Do not keep cycling resets on a damaged, wet or mechanically failing unit. The older safety instructions restrict user disassembly and describe electrical/cleaning precautions. Use the actual manufacturer support when signals or conditions do not match the documented route.
Two complete outage and reset decisions
Internet down, feeder power confirmed
Hypothetical record: In a hypothetical record, the household internet is down at 17:30. The feeder is powered, and its previously saved meal is 18:00. The caretaker has not yet observed output.
Decision: Keep the saved schedule condition separate from delivery; provide care and verify the actual 18:00 meal under observation.
The support statement permits continued saved feeding when powered. It does not establish that this fictional 18:00 meal actually occurred, that the food supply was adequate or that the pet consumed it. A later observation supplies a different kind of evidence.
Reboot intended, long hold would delete settings
Hypothetical record: A hypothetical user has three saved meals and wants only to reconnect. They have copied all three times and amounts but have not pressed the control.
Decision: Use the 3–5-second reboot route and its blinking-white release point; do not substitute an 8+-second factory reset.
The two durations select different operations. Keeping a copy of three meals is prudent but does not make deletion necessary. If a genuine factory reset later becomes appropriate, restore and verify all three settings and the current time zone before relying on the schedule.
These invented records explain decision boundaries. They do not demonstrate backup power, network recovery speed, exact meal timing or app operation on a tested feeder.
Verify the restored schedule, not just the connection light
After reconnecting, check the actual feeder time/time zone and every intended meal time and amount. Include any manual FeedNow event in the household record. A solid-blue indication is useful connection information; it is not proof of food delivered or individual intake.
If the connection is working but food appears outside scheduled times, use the separate Smart Feed ButtonLock/manual-meal guide. If the device has a mechanical error, use its actual model-specific support. Each pathway needs the facts relevant to that problem rather than another unconditional reset.
Download the editable record (TXT). Save your observations in your own copy; this page does not collect pet or household details.
Actual model and current app/guide names: Power arrangement and observed feeder status: Internet/router state checked separately: Actual LED color and slow/fast/solid pattern: Saved meal times, amounts and manual actions: Current feeder date/time/time zone: Supported Wi-Fi band and setup question: Reboot action and observed LED result: Factory reset considered? backup of settings kept? After reconnection: clock, schedule and actual next meal: Unresolved manufacturer-support question:
A useful completion record contains both the restored settings and a real supervised next-meal observation. Keep unresolved power, timing or delivery concerns visible until the appropriate check or support route answers them.
Sources and further reading
- PetSafe: Smart Feed Automatic Dog and Cat Feeder, 2nd GenerationCurrent second-generation model list, 2.4GHz Wi-Fi, AC/backup power and Smart Feed feature scope.
- PetSafe: My PetSafe® Smart Feed Automatic Pet Feeder is OfflineSaved feeding during internet loss is conditional on power; reconnection and supported-band checks.
- PetSafe: How to Reboot or Reset the PetSafe® Smart Feed Automatic Pet FeederSettings-preserving 3–5-second reboot versus 8+-second factory reset that deletes settings.
- PetSafe: My PetSafe® Smart Feed Automatic Pet Feeder is Not Dispensing Meals on TimeSetup time zone, regular Wi-Fi time updates and the current Date & Time check.
- PetSafe: Smart Feed quick-start guide 400-2362, ©20192019 guide: safety and AC/backup scope, LED patterns and reboot/reset consequences, pages 2–3 and 5–7. Its older app name and minimum OS values do not establish current app compatibility.