Practical guide

PetSafe Simply Feed Clock Drift: Check Power and Change the Time

Separate a wrong clock, locked controls and clock drift. Use the actual Simply Feed buttons, preserve the intended meal record and check power before changing portions.

Pet owners checking the instructions and actual behavior of a named automatic feeder · 7 minute read · Published

Start with the clock, not a larger portion

A meal that appears late can have several different explanations. The feeder clock may be wrong, the displayed AM/PM may be wrong, the clock may drift after you set it, or the device may fail to dispense even though its clock is correct. These are different observations. Increasing a portion does not fix a wrong time and can make the next successfully dispensed meal larger than intended.

This guide concerns Healthy Pet Simply Feed, model PFD00-14574. It does not describe Smart Feed Wi-Fi time synchronization or the Digital Two Meal countdown. Confirm the label on your feeder before following the buttons below. For a due meal, provide appropriate feeding care while investigating rather than waiting for the machine to prove that it is working.

Write the feeder’s current display beside a reference clock, including AM/PM and the date. Then write what you actually saw: a wrong displayed clock, a scheduled time passed with no output, or food present without a known delivery time. Food in the bowl is not a timestamp and is not proof that your pet ate it.

Check a late meal
Original decision diagram for Simply Feed. It shows an investigation order, not a diagnosis or a measured feeder result.

Unlock the buttons and view the current time

PetSafe’s current button-support page says the navigation buttons lock after two minutes of inactivity; the lock icon appears at the upper left. Press Up and Enter at the same time to unlock them. A locked control is not by itself a failed motor or an instruction to factory-reset the feeder.

The current clock-support page says to press Up to view the current time. Compare the actual hour and minute with your reference and include AM/PM when using a 12-hour display. If the clock is correct but a meal is absent, move to the existing portion/fault guide rather than repeatedly altering the clock.

What the observation tells you

What the observation tells you
ObservationUseful next checkWhat it does not establish
Buttons do not respond; lock icon presentUse Up+Enter, then view the clockIt does not establish a power or motor fault.
Clock is consistently wrongUse the existing-clock time-change routeIt does not show that the portion amount is wrong.
Clock changes relative to your reference laterRecord the change; check maker power/environment guidanceA difference alone does not identify the failed component.
Clock correct, expected meal absentCheck saved slots, operating/pause state and the existing dispensing guideA correct clock cannot prove output or intake.

Change an existing clock and keep track of its units

Use this sequence from PetSafe’s current time-change page for an already configured feeder. Read each display before advancing; do not substitute Simply Feed buttons into another model’s instructions.

  1. Unlock the buttons with Up+Enter if required. Press and hold Up for five seconds, until the hour field blinks.
  2. If you need to change the time format, press Left until the format field blinks. Use Up or Down to choose 12- or 24-hour format, then press Right. If the format is already correct, keep it.
  3. Use Up or Down to set the hour. With a 12-hour format, verify the correct AM/PM. Press Right to move to minutes.
  4. Use Up or Down to set minutes, then press Right to finish setting the time. View it again against your reference clock.

The operating guide 400-1863/1, ©2014, pages 12–13 describes initial setup after power is connected. That setup also continues into schedule selection. Do not confuse an initial setup screen with the existing-clock change route above. Follow what your actual display shows and use the maker’s instructions if it does not match.

The same guide ties the time format to the portion display: 12-hour uses cups and 24-hour uses millilitres. A format change therefore affects how you read the amount. The guide’s printed default amounts, such as 2 cups or 473 ml, are source values rather than a new recommendation for your pet. Read every saved meal again; do not translate an amount from memory or adopt a default simply because it appears.

Investigate drift with the maker’s power guidance

PetSafe’s late-meal support page identifies power concerns, including weak batteries and operating temperatures, as possible contributors to clock drift. It calls for indoor, climate-controlled use and appropriate new non-rechargeable alkaline D-cell batteries. It also mentions checking battery contacts for corrosion or discoloration. These are documented checks, not proof that one particular clock error is caused by batteries.

Use the correct battery arrangement and polarity from your actual instructions. Keep the area dry, and keep children and pets clear of a device that starts automatically. Do not open the electronic base, modify the feeder or attempt a motor repair. The older operating guide says to unplug before putting on or removing parts or cleaning; it also gives a separate electrical-safety instruction for a wet plug. A damaged power lead or wet electrical component requires the appropriate support route, not a trial-and-error restart.

After a battery change or power interruption, verify the actual display and every saved meal. This page does not promise that settings will always be retained. If the time keeps drifting after the documented checks, give PetSafe the model, guide revision, power arrangement and before/after clock record. A longer record is more useful than an unsupported diagnosis.

Recheck the saved schedule before relying on it

A clock correction and a schedule correction are separate actions. Check all used meal slots, AM/PM and amounts, then inspect unused slots for accidental settings. Confirm the feeder is in its intended operating state. The existing portion-check guide explains priming, dispensing differences, pause/setup state and Simply Feed FeedNow behavior; keep those details together at that page.

Do not repeatedly press FeedNow to test whether a clock change worked. Simply Feed’s FeedNow advances the next scheduled meal, rather than adding an independent extra meal in the same way as Smart Feed. Advancing it can change the next meal you expect to observe. Record any manual feeding action and check the resulting next scheduled meal.

Use a supervised next-meal observation, keeping clear of moving parts. Record the actual scheduled time and whether food was delivered; keep food delivered and food eaten as separate facts. If the clock is correct but output is wrong, the next question is the dispensing pathway, not further time adjustment.

Two timing records and the next useful action

A fixed 12-minute clock error

Hypothetical record: At a hypothetical 16:00 reference time, the feeder reads 16:12. Its intended clock-based meal is 17:00.

Decision: Correct the current clock and recheck saved meal times and units; do not increase the meal amount.

The display is 12 minutes ahead. If the device otherwise follows that clock, 17:00 feeder time could arrive at 16:48 reference time. This explains a possible early meal; it is not an actual observed delivery or a proof that the device will work.

Correct initially, different the next day

Hypothetical record: A hypothetical record shows the clock matched 08:00 when set, but it reads 08:07 at the next 08:00 reference check. The user has not recorded battery condition or indoor temperature.

Decision: Keep the seven-minute difference and investigate documented power/environment checks before identifying a cause.

This differs from a one-time wrong setting: a later comparison changed. It still does not prove battery failure. Record conditions, perform only maker-supported checks, then verify the clock and schedule again or contact support.

Download the editable record (TXT). Save your observations in your own copy; this page does not collect pet or household details.

Model and guide revision:
Date and reference clock:
Displayed feeder time and AM/PM:
12-hour/cups or 24-hour/ml display:
Actual symptom: wrong fixed time / time changes later / meal absent
Battery type, replacement date and visible concern:
Before: each saved slot, time and amount:
Time change made and format retained:
After: each saved slot, time and amount:
Next scheduled check and actual observation:
Unresolved question for PetSafe:

Stop changing amounts to compensate for an unexplained timing problem. Keep the current clock, intended meals and actual observations together. That record tells you whether the next action belongs to time setup, dispensing checks or manufacturer assistance.

Sources and further reading

  1. PetSafe: Healthy Pet Simply Feed™Simply Feed model identity and current product/support route. Use this model’s instructions rather than Smart Feed or timed-lid controls.
  2. PetSafe: Your Healthy Pet Simply Feed™ is Not Dispensing Meals on TimePossible power and temperature contributors to clock drift, appropriate battery guidance and escalation.
  3. PetSafe: The Buttons on Your PetSafe® Healthy Pet Simply Feed™ are Not WorkingTwo-minute navigation lock and the simultaneous Up+Enter unlock action.
  4. PetSafe: How to Change the Time on Your PetSafe® Healthy Pet Simply Feed™Viewing and changing an existing clock with the Up, Left, Right and Enter navigation controls.
  5. PetSafe: Simply Feed operating guide 400-1863/1, ©20142014 guide: safety limits, initial time setup and cup/ml format link, pages 2–3 and 12–13; troubleshooting page 19. Initial setup differs from the current existing-clock change route.