Practical guide
PetSafe Two-Pet Meal Splitter: Installation and Individual Intake Checks
Install the documented splitter for Simply Feed or Smart Feed, then record each bowl separately. A divided outlet cannot prove equal output or equal intake.
Confirm the actual feeder and accessory first
A two-pet meal splitter divides one dispenser outlet into two bowl routes. It does not become two independently programmed feeders. Start by confirming that you have the accessory intended for the actual feeder and that both pets can use the feeding arrangement appropriately.
PetSafe supplies separate current installation pages for Healthy Pet Simply Feed and Smart Feed. Both pages describe the same panel, stand and splitter assembly sequence. This guide combines those two documented routes because the main installation steps agree. It does not extend compatibility to Five Meal, Digital Two Meal, FreshFeed or an unlisted dispenser.
Before installation, identify the feeder label and accessory instructions. Keep the manufacturer’s safety guidance with the task: the feeder starts automatically, moving parts need clearance, and electronic parts must not be immersed. Follow the actual guide before handling attachments or cleaning. A damaged or mismatched part should be resolved with the maker rather than forced into the outlet.
The two documented installation routes
| Feeder | Supported source route | What remains separate |
|---|---|---|
| Healthy Pet Simply Feed | Its current 2-Pet Meal Splitter support page | Its clock, cup/ml display, priming and advance-next-meal FeedNow. |
| Smart Feed | Its current 2-Pet Meal Splitter support page | Its app schedule, physical/app FeedNow and ButtonLock. |
| Other feeder | No compatibility established by these two pages | Use that model’s actual accessory documentation; do not infer a fit. |
Follow the maker’s panel, stand and outlet sequence
Read the full support page for your model and keep children and pets away during setup. The documented assembly is:
- Wash the splitter and accompanying materials with soap and water before installation, following the actual instructions and drying before use.
- Attach the privacy panel to the stand.
- Attach the stand and privacy panel to the meal splitter.
- Lift the front of the feeder and slide the splitter into the food dispenser outlet as shown in the maker’s instructions.
- Place a bowl under each food chute. Confirm the accessory is seated as intended and the feeder is positioned appropriately before feeding.
The source says meal sizes may need to change to accommodate two pets. It does not say to double every previous setting, and it does not provide an equal-delivery guarantee. “Two pets” is a hardware arrangement, not an individual feeding prescription.
If the parts do not fit as shown, stop and check identity, orientation and the current accessory instructions. Do not trim the chute, improvise a spacer or modify the base. A privacy panel is part of the described assembly; its presence alone is not proof that a pet cannot move between bowls.
Keep the setting, delivered food and intake separate
The dispenser has one requested meal setting. Food then reaches two bowls, and two pets may eat from those bowls. Those are three stages of evidence. A cup setting does not directly identify gram weight, and total bowl output does not tell you how much each pet consumed.
If you need a household check, record the actual measurement method and each bowl separately. Keep the animals and your hands clear of moving equipment while checking operation. Include leftovers, spills and any movement between bowls. If individual intake cannot be established, write “unknown” rather than allocating half of the total to each pet.
Use the existing Simply Feed portion-check guide for that model’s calibration and priming. Use the actual Smart Feed guide for its own settings. Do not carry a measured amount from one food, feeder or refill condition into another without checking what changed. A kitchen-scale observation is a household record; it is not a manufacturer calibration certificate.
Check whether sharing one food route suits both pets
Two pets can have different meal needs even when they eat the same food. They can also require different foods or schedules. A shared hopper and divided outlet cannot independently choose the food for each bowl or stop one animal taking another’s meal.
If the animals need distinct prescribed diets, do not treat the splitter as a way to maintain that separation. Use your existing veterinary feeding instructions and an arrangement that actually keeps the food and access separate. This guide does not calculate treatment amounts, decide diet compatibility or certify a particular pet’s access needs.
For the same food, write the intended individual plan before adjusting the shared setting. Ask what observation would demonstrate that the arrangement supports that plan. If you can only observe total output, the individual question remains unanswered. The food-inventory guide helps retain the food identity and each pet’s separate record; it does not turn a shared bowl route into known intake.
Two complete household observations
Unequal output, before either pet eats
Hypothetical record: In a hypothetical supervised record, a 40 g total delivery is collected as 22 g in bowl A and 18 g in bowl B. No pet has yet accessed either bowl.
Decision: Record both outputs. Do not enter 20 g as the observed amount in each bowl and do not identify either value as intake.
22+18=40 g and the outputs differ by 4 g. The record establishes an unequal split in this fictional event only. It neither predicts the next event nor determines the correct feeding amount for either animal. A repeatable real check would need the actual food, setting and observation method.
Equal output but access is shared
Hypothetical record: In another hypothetical record, 12 g reaches each bowl. The first pet can move between both bowls, and the caretaker leaves before observing the full meal.
Decision: Record 24 g total delivered and mark both individual intakes unknown.
12+12=24 g establishes the fictional delivered total. Equal bowl output does not tell you which pet ate it, how much remained or whether food was spilled. Restricting the record to known facts prevents a false 12 g-per-pet intake entry.
These examples are invented to show the accounting decisions; no splitter or pet was tested. Their useful result is the question they expose: can this arrangement produce the individual information and access separation your household actually needs?
Keep a per-pet record before changing the shared setting
For a scheduled or manual delivery, write who initiated it, the device setting, the observed output in each bowl and any access uncertainty. Manual controls differ between the two feeder families: Simply Feed FeedNow advances the next scheduled meal, while Smart Feed FeedNow can provide an extra snack or meal. Keep that difference in the record rather than adding both events to an assumed daily total.
If another household member operates Smart Feed, use its current household-controls guide to agree on manual actions. A locked physical button still leaves app FeedNow available. For a mechanical fit issue or repeated unexpected output, use the actual maker’s accessory support with the feeder and part identity.
Download the editable record (TXT). Save your observations in your own copy; this page does not collect pet or household details.
Feeder model and accessory identity: Same food suitable for both pets? / unresolved question: Intended individual meal plan from your existing advice: Feeder’s current unit and meal setting: Date, scheduled/manual action and caretaker: Bowl A actual delivered amount and measurement method: Bowl B actual delivered amount and measurement method: Leftovers, spills or bowl-switching observed: Which pet could reach each bowl? Individual intake known / unknown, and why: Change proposed and verification needed:
The next action follows the unresolved question. Resolve accessory fit with the maker, meal needs with your existing individualized feeding advice, and bowl-switching with an arrangement that actually controls access. Increasing one shared number cannot answer all three.
Sources and further reading
- PetSafe: How to Install the 2-Pet Meal Splitter to Your PetSafe® Healthy Pet Simply Feed™Simply Feed splitter assembly, outlet placement and two-bowl route; no equal-output guarantee.
- PetSafe: How to Install the 2-Pet Meal Splitter to Your PetSafe® Smart FeedSmart Feed splitter assembly and the distinction between an accessory and an individual meal setting.
- PetSafe: Healthy Pet Simply Feed™Simply Feed model identity and current product/support route. Use this model’s instructions rather than Smart Feed or timed-lid controls.
- PetSafe: Smart Feed Automatic Dog and Cat Feeder, 2nd GenerationCurrent second-generation model list, 2.4GHz Wi-Fi, AC/backup power and Smart Feed feature scope.
- FeedPetWise: A Pet Food Inventory for Multiple Pets: Open Dates and Stock RotationFood identity, package/lot records and separate records for pets; package disappearance is not individual intake.